FlexShade ZIP XL Roller Shades

• Available in sizes up to 25' w x 15' h, depending on fabric selection.

• Uses enhanced ZIP 127 headbox; headbox height 5″.

• ZIP 127 headbox available in square, curved, and angled.

• Fabric retained by a continuous coil zipper retention system.

• Weighted hem bar stabilizes shade during operation.

• Functions as an operable insect screen or room divider.

• Shade can be paired with an obstacle detection motor for added fabric protection.

Click to view documents related to this model.

Catalog Page

Cleaning: Outdoor Shades

Installation Instructions

Submittal

Graphic Printing Instructions

Click to view residential videos related to this model.

FlexShade Zip Exterior Motorized Roller Shades - Part 2: Cassette Mounting

To Mount the headbox on a Wall or ceiling using cassette brackets, simply attach the cassette brackets to the mounting surface using #10 flat head screws. It is the installer’s responsibility to choose the length of #10 flat head screw appropriate for the mounting surface. The mounting brackets must be installed level with each other. Be sure to drive the screws in flush with bracket.

FlexShade Zip Exterior Motorized Roller Shades - Part 2B: Direct Mount Instructions

To mount the headbox permanently, you will first need to attach the mounting brackets to the headbox as a spacer between the headbox and the wall. Be sure to leave a 1¾" (45mm) gap between the end cap and mounting bracket.

FlexShade Zip Exterior Motorized Roller Shades - Part 3: Installing Side Channels

This video will cover methods for installing side channels. For instructions on preparing your site for proper product installation and mounting of the FlexShade Zip Motorized Shade headbox, please see the previous instructional videos in this series. These instructions do not apply for installations using the ZIP 127 angled headbox.

FlexShade Zip Exterior Motorized Roller Shades - Part 4: Limit Setting

To begin programming with your remote, first connect power to one motor. Select a transmitter channel to assign that particular motor unit. Hold the UP and DOWN buttons until the motor jogs, and then release. Note the motor direction. To reverse the direction, hold the MY/STOP button for 5 seconds until the motor jogs. Failure to complete this step can only be corrected with a motor reset.

FlexShade Zip Exterior Motorized Roller Shades – Part 5: Advanced Programming

This video will cover advanced programming for proper operation of the shade. For instructions on proper product installation and mounting of the FlexShade Zip Motorized Shade as well as initial limit setting for the Somfy RTS Shade Motor, please see the previous instructional videos in this series.

Podcast: Window shades improve workplace comfort and productivity

Jeff Miller, our Solar Control Product Manager, discusses how solar shading can improve the comfort and productivity of workers, and improve your company's bottom line.

Wind Tunnel Testing the FlexShade Zip and Zip XL

When a shade system is being used outdoors, it’s important that it be as resistant as possible to wind and weather. Our FlexShade ZIP exterior roller shade is often used to protect outdoor spaces from sun, heat, wind, and insects. We recently sent a team to learn exactly that.

Somfy: Initial Programming & Limit Setting R-01

Part of a series of how-to videos produced by Somfy Systems, this video discusses Initial Programming & Limit Setting.

Somfy: Limit Adjustment in User Mode R-04

Part of a series of how-to videos produced by Somfy Systems, this video discusses Limit Adjustment in User Mode R-04.

Somfy: Factory Reset - AC Motors

Part of a series of how-to videos produced by Somfy Systems, this video discusses Factory Resetting - AC Motors

Somfy: Add or Delete a Transmitter

Part of a series of how-to videos produced by Somfy Systems, this video discusses how to Add or Delete a Transmitter.

Somfy: Setting the "MY Favorite" Position

Part of a series of how-to videos produced by Somfy Systems, this video discusses how to Set the "MY Favorite" Position.

How-To-Video: Site Measurement for FlexShade ZIP XL

In this detailed guide, Draper® walks you through the correct method for recording precise measurements required to order and install FlexShade® ZIP and ZIP XL Exterior Shades. With the right tools and a methodical approach, you’ll ensure a perfect fit—every time.

How-To-Video: Installing Brackets for the FlexShade ZIP XL

In this professional installation tutorial, Draper® walks you through precise bracket mounting techniques for FlexShade® ZIP and ZIP XL Exterior Shades. Whether you’re working with wall-mounted or ceiling-mounted brackets, following these best practices ensures level alignment, structural integrity, and flawless shade engagement.

How-To-Video: Installing the Headbox for the FlexShade ZIP XL

Welcome to Draper’s step-by-step installation guide for securely mounting your FlexShade® ZIP headbox using either ceiling or wall mount brackets. This video walks you through every phase of the headbox installation process to ensure a safe, accurate, and professional setup for your ZIP XL exterior shades.

How-To-Video: Preparing the Side Channels for the FlexShade ZIP XL

In this step-by-step installation video, we walk you through how to properly prepare side channels before installing your FlexShade® Zip system. Proper prep is essential to ensure smooth installation and long-term performance.

How-To-Video: Installing the Side Channels for the FlexShade ZIP XL

Welcome to your official Draper® installation guide! In this video, we’ll walk you through the precise process of installing side channels for your FlexShade® ZIP 127 Curved, ZIP 127 Square, and ZIP XL exterior shades. This guide is not intended for ZIP 127 Angled Headbox systems.

How-To-Video: Modifying the Side Channels for the FlexShade ZIP XL

Modifying the length of your FlexShade® ZIP shade side channels? In this step-by-step guide, Draper® shows you how to measure, cut, and reassemble side channels with precision—ensuring a clean fit and optimal function every time.

How-To-Video: RTS Motor Limit Setting for the FlexShade ZIP XL

https://www.youtube.com/embed/lClQB0IUWgY?si=aO_wQBA_lYEGjUPo

Click to view residential case studies related to this model.

Outdoor Shades Doubled This Restaurant's Seating Capacity

If there’s one thing popular restaurants never seem to have enough of, it’s space. The Cow: An Eatery is no exception. The Cow is in beautiful Morrison, Colorado, home to Red Rocks Amphitheatre and Red Rocks Park. The restaurant has a busy mix of tourists and local regulars.

Private Residence - Austin, TX

Motorized FlexShade ZIP XL Exterior Shade featuring Phifer TuffScreen installed at private residence in Austin, TX

Private residence - Dallas, TX

FlexShade ZIP and FlexShade ZIP XL window shade provide a barrier from the sun, weather, and insects on a poolside patio in a private residence in Dallas, TX

Private Residence – Orlando, FL

FlexShade ZIP XL Exterior Motorized Shades with Mermet E Screen 3% Charcoal/Grey installed at a Private Residence in Orlando, FL

Private Residence – The Villages, FL

Digitally Printed Motorized FlexShade Battery Window Shades with Oslo RD White installed at a Private Residence in The Villages, FL

Short Hills Country Club - Short Hills, NJ

Flexshade ZIP and FlexShade ZIP XL motorized roller shades featuring Phifer SheerWeave SW2400 3% open fabric in Charcoal color installed at Short Hills Country Club in Short Hills, NJ.